Our Process: Finalization

Finished Floor Systems Require Ongoing Care

The polished concrete floors we offer at Ardor Solutions are very durable and stand up well to the tests of time and foot traffic. However, they are not indestructible or impervious to factors like scratches, chips, or stains. These finished floor systems offer a lot of advantages, but they must be maintained like any system.

Phase 4: Concrete Floor Maintenance Is Part of Your Flooring System’s Life Cycle

Like any other part of your property or building, your flooring system requires maintenance and forethought to get the type of long-term performance you want. The work at Ardor Solutions does not stop at installation either; we’re here to offer guidance on the best practices for maintaining your floor, and we provide ongoing support with other services as well.

Want to take a closer look at our early process steps in planning and preparation? Click through and see the early work that goes into your concrete flooring.

We call your concrete flooring a finished floor system because whether we are restoring existing concrete or installing something brand new, the flooring in your facility is something that will likely get used everyday. You have to maintain machinery and pieces of equipment that are used repeatedly. We bring the same philosophy to your concrete flooring. It is part of your facility that every person depends on to perform its job: offering safe passage as you walk across it and standing up to the wear and tear of time.

Do’s and Don’ts of Concrete Floor Maintenance

The team at Ardor Solutions have the capabilities and in-depth knowledge to perform a broad range of services for your concrete flooring, but there is a lot you can do to contribute to the lifetime of your flooring. Here is a list of do’s and don’ts on how to maintain your floor systems.

Good Habits in Concrete Floor Care

Do keep your floors clean. Over time, dirt and other contaminants can act like sandpaper on the polished concrete surface. They will harm the shine of the polish and hurt the overall appearance of your flooring.
Do place walk-off floor mats at entrances to help reduce salts and dirt tracked onto the surface.
Do keep walk-off mats maintained and clean.
Do prevent rainwater from collecting on the floor, as it can be acidic and etch a polished concrete floor.
Do use felt pads on chairs and other furniture feet.
Do lift heavy furniture when moving it.
Do use pads under rolling chairs.
Do limit the application of tape on grey, natural concrete to two hours, and use only 3M Blue Painter’s Tape.
Do feel free to use rugs that allow vapors to pass through them or those with open weave/waffle-like backing for indoor flooring systems.

Bad Habits in Concrete Floor Care

Do not scrape or drag steel or sharp objects over the floor.
Do not use a rolling desk or office chair on a polished concrete floor without a large pad.
Do not apply sealers or waxes to these floors. If the floor’s shine has diminished, contact Ardor Solutions to schedule a re-burnish.
Do not use ammonia, bleach, Mop & Glow, Pine-Sol, Lysol, or citrus-based products.
Do not use Swiffer WetJet-style cleaning tools. The liquid in these devices contains trace amounts of solvent material.
Do not apply tape of any type for any length of time to dyed, colored, or stained concrete.
Do not place potted plants directly on your polished surfaces. Do use a plant dolly or plant stand with legs to allow for ventilation between the planter and surfacing system. Failure to do so may leave a white mineral deposit that can permanently discolor the surface.
Do not allow plant fertilizers to come into contact with polished floors.
Do not place rubber-backed mats on any polished or decorative concrete surfacing system. Rising vapors that are emitted from the floor must be allowed to evaporate naturally. Rubber-backed mats trap rising vapors, preventing the natural evaporation process. When evaporation is constricted, hard mineral deposits can build up, which is difficult, if not impossible, to remove without discoloration.

Maintaining Your Concrete Flooring for the Long-Term

With right care and attention, your polished concrete flooring systems can last a lifetime. Following the advice of the experts at Ardor Solutions will offer a substantial return on the investment you are making in your flooring today. We offer a density, hardness, and professional appearance that no one else can match. Others have tried, but they cannot duplicate our results.

Some people might not think about the floor under their feet everyday, but like anything else you use that much, it requires a little time and attention to hold up over the years. At this point in our process, we’ve applied a step-by-step process to ensure your flooring system offers the best performance possible. The only element left is maintaining it.

Get Started Today With Your Needs Assessment

Not sure where to start? Our free needs assessment is an excellent place to start.

Schedule a Needs Assessment

Phase 5: Concrete Floor Polishing Process and Ongoing Support

To keep your Ardor Solutions Floor in perfect condition, you should maintain it with routine cleaning and the occasional stain removal, as needed. Your new Ardor Solutions Floor meets all documented industry standards for dust-proofing, water resistance, hardness, gloss, and slip resistance. Who better to help you keep it that way than the ones who installed it?

We don’t consider our job over just because your flooring is installed. We’re always here to deliver the post-installation services you might require. These services include ongoing maintenance contracts, remedial cleaning, periodic inspections and testing, stain removal, and new product sales.

Now that you know the process from start to finish, are you ready to launch your polished concrete project? When you’re ready, the experts at Ardor Solutions are here to provide our industry insight and years of knowledge in selecting the type of floor covering you need. Contact us today and let us work with you to plan your next project.

Schedule a Free Needs Assessment

If you’re ready to start exploring the possibilities for your next industrial flooring project, schedule a needs assessment to get started.